Service details and vehicle fitment
2007-2013 GM LS Chopacabra Cam Tune File
This tune file is built for 2007-2013 GM LS truck, SUV, and performance platforms running 4.8L, 5.3L, 6.0L, or 6.2L combinations with a Texas Speed Chopacabra camshaft with the exact cam confirmed in the Tune Builder.
This is made for customers who want the aggressive Chopacabra idle, but still want the vehicle to start clean, idle right, drive smooth, and behave on the street. Send your factory read file and full mod list, and we build the calibration around your exact setup.
This is not a random pulled file. Your tune is built around your factory read file, operating system, engine size, transmission, cam setup, converter, gear ratio, tire size, and full modification list. Full Custom includes datalog review and up to five revisions for the submitted build. Base Tunes include two revisions. Work is limited to the service purchased.
Built for 2007-2013 GM LS Chopacabra Cam Setups
The Chopacabra cam can deliver the idle people want, but the tune is what makes the vehicle actually enjoyable. These GM LS platforms need startup, airflow, fueling, spark, idle control, torque management, and transmission behavior corrected so the vehicle does not stall, surge, buck, or fight you in traffic.
- Use the Tune Builder to confirm the supported year, vehicle, engine and cam combination before ordering
- Designed for Texas Speed Chopacabra setups confirmed in the Tune Builder
- Supports common bolt-ons like headers, cold air intake, exhaust, intake manifold upgrades, converter changes, and DOD/AFM delete setups
- Built from your actual factory read file, not a one-size-fits-all upload
- Revision support included so the tune can be worked through properly
- Requires HP Tuners hardware and credits for flashing
Cam Compatibility
- Texas Speed Chopacabra
- Confirm the exact cam and engine combination in the Tune Builder before ordering.
- Cammed 4.8L, 5.3L, 6.0L, and 6.2L LS combinations
- DOD/AFM delete combinations where properly installed
What This Tune Covers
- Startup, idle, airflow, fueling, spark, and drivability calibration
- Cammed idle control for cleaner starts and less stalling
- Throttle response and part-throttle drivability
- Torque model and driver demand behavior where applicable
- Transmission tuning support where applicable
- Common bolt-ons including headers, intake, exhaust, converter, and manifold swaps
Compatible GM LS Vehicles
Vehicle names alone do not establish compatibility. Confirm your exact model year, engine, cam and controller in the Tune Builder before ordering.
- Choose your exact year, make and model in the Tune Builder.
- Select the installed engine, camshaft, transmission and drivetrain.
- Only supported combinations produce a matched tuning option. Contact JRJ if your combination is unavailable.
Engine Coverage
- 4.8L LS truck engines
- 5.3L LS truck engines
- 6.0L LS truck, SUV, and performance engines
- 6.2L LS engines where supported by HP Tuners
- DOD/AFM delete setups where mechanically correct
What We Need From You
- Upload your original HP Tuners stock read and build details through your private JRJ Tune Portal.
- Include your order number
- Include year, make, model, engine size, and transmission
- List your cam, headers, intake, injectors, converter, gear ratio, tire size, exhaust, and DOD/AFM delete details
- Send your cam card or cam specs if available
- Tell us any current issues: stalling, surging, rich idle, lean codes, shift problems, etc.
Good For
- 2007-2013 GM LS cam swaps
- Silverado and Sierra 4.8L / 5.3L / 6.0L / 6.2L builds
- Tahoe, Yukon, Suburban, Avalanche, Escalade, and TrailBlazer SS builds
- Cammed Camaro, Corvette, and Pontiac G8 LS combinations
- Texas Speed Chopacabra cam setups
- Other cam combinations require confirmation through the Tune Builder
- Headers, intake, exhaust, converter, and street performance builds
Not For
- 1998-2006 GM trucks
- 2014+ Gen V GM trucks
- Diesel trucks
- Vehicles with mechanical problems
- Boosted or nitrous setups unless custom details are provided
- Customers unable to read and flash their own file
Performance & Build Responsibility Notice
This is a performance calibration designed for modified GM LS vehicles running a camshaft and supporting parts.
You are responsible for making sure your build quality is up to par before flashing or running this tune. Your engine, valvetrain, fuel system, drivetrain, wiring, sensors, injectors, exhaust, and all supporting parts must be correctly installed, mechanically sound, and capable of handling increased performance.
Poor installation, worn parts, incorrect valve spring setup, wrong pushrod length, weak fuel supply, vacuum leaks, exhaust leaks, bad sensors, or unsafe mechanical condition can cause drivability issues or engine damage that no tune can fix.
J.R. Jones Automotive & Performance is not liable for engine failure, drivetrain damage, PCM/ECU damage, or any issue caused by poor build quality, improper installation, unsafe flashing practices, incorrect customer-supplied information, or misuse of this tune.
Flashing Safety Notice
Always flash using a hard-wired USB connection. Do not flash over weak connections, unstable power, or while the vehicle battery is low.
Use a battery charger or maintainer during the write process. Do not interrupt the flash once writing has started.
Customer is responsible for having the proper tuning hardware, software, licensing, and stable equipment needed to read and flash the vehicle.
Need Help Matching Your Vehicle?
If your Silverado, Sierra, Tahoe, Yukon, Suburban, Avalanche, Escalade, Camaro, Corvette, G8, or TrailBlazer SS has injectors, converter changes, gear/tire changes, boost, nitrous, or anything beyond a normal Chopacabra cam setup, use the Build Your Tune page so we can match the calibration to your exact vehicle.
